171
2.
Touch each list and select the appropriate
information:
Memory:
Selects the memory location that contains the
source information, either the main unit memory or
PC Card memory.
Extract From:
Selects which Contact or Data File is to be used
as the information source.
Name Field:
Select which field in the source information is
assigned as the recipient name in the address
book.
Pager PIN Field:
Select which field in the source information is
assigned as the recipient’s pager PIN in the
address book.
Pager Service Field:
Select which field in the source information is
assigned as the recipient’s pager service in the
address book. This information is provided for
reference when the user is addressing a message
and is not included in the actual message that is
sent.
3.
Touch OK to save the changes.
Sending messages
Before sending messages, make sure is connected to a
telephone line via a modem. Also make sure the
modem as well as the paging service is correctly
configured.
1.
Touch PAGER, then select “Send Mes-
sages...”.
2.
Select the current message, tagged mes-
sages, or all of the messages to send. Then
touch OK.
The following screen appears.
Touch OK.
To Next Page
Loading...
