83
2
Start-up
Start-up lets you configure the start-up display to
suit your own requirements.
2-6-3
The Start-up display can be used to set the
following:
• Start-up: Can be set to On, Off.
• Picture: Globe is the default picture graphics. You
can also touch User's Picture to make a graphic
entry or load an entry through Scrapbook.
• Ask password at start-up: Start-up display can be
set to ask for a password at start-up, thus
protecting all entries. You must first register a
password by touching Password in TOOLS
Personal.
• Show Owner's Information: Start-up can be set to
Show Owner's Information (increasing the
chances of your unit being returned if it is lost).
Your personal information must first be registered
with TOOLS Personal, see p. 80.
To display owner's information at start-up:
1.
Touch TOOLS and touch Start-up twice.
2.
Touch On to set Start-up to On.
3.
The start-up display picture will be the default
Picture. To use a User's Picture, check the
Use box and then touch User's Picture. You
can then draw pictures or paste a picture
from Scrapbook.
4.
You can check the Ask password at start-up
box. For more information on the Secret
Password function, see p. 85.
To Next Page
Loading...
Need help?
General
