73
Replacing with a PC File
1.
Make sure you are either in the Worksheet
mode, or if you are in the Index mode you
have selected a worksheet from the
Worksheets tab.
2.
Touch SEND, then select “Replace with PC
File....”
3.
Select data sorce, Main Unit or PC Card.
Select the PC file. Touch OK.
4.
Touch OK.
Data in the worksheet is replaced with the
new one.
NOTE
• PenCell can read Excel 3.0 and 4.0 files. It writes
Excel 4.0 files. See Appendix E on file compatibility.
• For more details about PC Files, see the other
Operation Manual.
• Use an optional Link Software to transfer PC files
from/to a PC. For more details on operating the Link
Software, see the manual of the Link Software.
To Next Page
Loading...
Need help?
General
