239
5.
Use a ballpoint pen or a similar object to
remove the old memory backup battery.
6.
Insert a new CR2032 battery, positive (+) side
up.
7.
Replace the backup battery cover and secure
it with the screw.
8.
Set the battery replacement switch to the
"NORMAL OPERATION" position.
If nothing happens when you press ON:
• Setting the battery replacement switch to "RE-
PLACE BATTERIES" shuts off operating power.
Check that this switch is set to "NORMAL
OPERATION".
• Repeat the battery replacement procedure step
by step.
To Next Page
Loading...
Need help?
General
