259
Problem: Connection with remote system
terminates unexpectedly.
User message: None.
Cause: Surge of line noise, user error, etc.
Solution: Try again.
Problem: Dialing terminated unexpectedly.
User message: Problem during dialing, auto dialing
was terminated.
Cause: Incorrect phone number entered.
Incorrect line type selected (tone or
pulse).
Modem not connected to a phone
line.
Solution: Check phone number in Dialing
Directory.
Check Line Type setting in Modem
Setup.
Check modem is correctly con
nected to your unit and a telephone
line.
Problem: Auto log-on fails.
User message: There was a problem during auto
log on. Check the auto log on
commands.
Cause: Incorrect auto log-on settings.
Excessive line noise.
Solution: Check auto log-on settings. Make
sure “S” and “R” character strings
are correct and that “
” is included
at the end of each line that requires
it.
Wait a short period of time and try
again.
To Next Page
Loading...
