Siemens FS20 - Page 129

Updating the firmware
Station: Updating the FW of the main CPU and additional CPUs
29
129 |
188
Building Technologies
009052_s_en_
--
Fire Safety
2016
-
06
-
02
3. Click on 'OK' in the 'Information' window.
 The following window is opened:
4. Select 'Run in background' in order to run the firmware update in the
background while continuing to work in SintesoWorks.
 The active firmware update is indicated by the symbol on the right-
hand side of the status bar.
 Pop-up windows in the bottom right-hand corner of the software will notify
you when the firmware download and the firmware update are complete.
5. Wait until successful completion of the update is shown as follows on the LED
matrix display:
– Active ↑ CPU: a
– Inactive CPU: i
 The CPU card is restarted.
 The firmware on the CPU card is updated. The CPU card is in ↑ normal
operation.
Error during firmware update
If errors occur during the firmware update, the following is shown on the LED
matrix display:
:
-
(