Station: Updating the FW of the main CPU and additional CPUs
29
130 | 188
29.2.5.4 Starting the firmware update in SintesoWorks
1. Select 'Initiate update from tool'.
2. Select the connection type.
The available 'Station' are displayed.
3. Select the 'Station' you want.
– The available 'Stations' are preselected. If a 'Station' is available but not
preselected and a time stamp has been entered in the 'System status'
column, specific system data has been modified on the 'Station' but not yet
saved. The specific system data is deleted when you update the firmware.
NOTICE! Save the configuration data before updating the firmware.
4. Select 'Start'.
The following window is opened:
To Next Page
Loading...
