Wireless Network Profiles
11.1 Configuring Wireless Network Profiles
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
115
ESSID Enter the Extended Service Set Identifier (ESSID). If the
value defined for ESSID value is not the same as the profile
name, the SSIDs can be searched based on the ESSID
value and not by its profile name.
5. Click
to configure VLAN settings.
For more information, see Configuring VLAN Settings for a WLAN SSID Profile
(Page 117).
To configure WLAN settings for an SSID profile:
(scalance)(config)# wlan ssid-profile <name> (scalance)(SSID Profile <name>)# essid
<ESSID-name>
(scalance)(SSID Profile <name>)# type {<Employee>|<Voice>|<Guest>}
(scalance)(SSID Profile <name>)# broadcast-filter {All|ARP|Unicast-ARP-Only|Disabled}
(scalance)(SSID Profile <name>)# dtim-period <number-of-beacons>
(scalance)(SSID Profile <name>)# multicast-rate-optimization (scalance)(SSID Profile
<name>)# dynamic-multicast-optimization (scalance)(SSID Profile <name>)# dmo-channel-
utilization-threshold (scalance)(SSID Profile <name>)# a-max-tx-rate <rate>
(scalance)(SSID Profile <name>)# a-min-tx-rate <rate> (scalance)(SSID Profile
<name>)# g-max-tx-rate <rate> (scalance)(SSID Profile <name>)# g-min-tx-rate <rate>
(scalance)(SSID Profile <name>)# zone <zone>
(scalance)(SSID Profile <name>)# bandwidth-limit <limit>
(scalance)(SSID Profile <name>)# per-user-bandwidth-limit <limit> (scalance)(SSID
Profile <name>)# air-time-limit <limit>
(scalance)(SSID Profile <name>)# wmm-background-dscp <dscp> (scalance)(SSID Profile
<name>)# wmm-background-share <share> (scalance)(SSID Profile <name>)# wmm-best-
effort-dscp <dscp> (scalance)(SSID Profile <name>)# wmm-best-effort-share <share>
(scalance)(SSID Profile <name>)# wmm-video-dscp <dscp> (scalance)(SSID Profile
<name>)# wmm-video-share <share> (scalance)(SSID Profile <name>)# wmm-voice-dscp
<dscp> (scalance)(SSID Profile <name>)# wmm-voice-share <share> (scalance)(SSID
Profile <name>)# rf-band {<2.4>|<5>|<all>} (scalance)(SSID Profile <name>)# content-
filtering
(scalance)(SSID Profile <name>)# mfp-capable (scalance)(SSID Profile <name>)# mfp-
required (scalance)(SSID Profile <name>)# hide-ssid
(scalance)(SSID Profile <name>)# out-of-service <def> <name>
(scalance)(SSID Profile <name>)# time-range <profile name> {<Enable>|<Disable>}
(scalance)(SSID Profile <name>)# inactivity-timeout <interval>
(scalance)(SSID Profile <name>)# local-probe-req-thresh <threshold> (scalance)(SSID
Profile <name>)# max-clients-threshold <number-of-clients> (scalance)(SSID Profile
<name>)# end
(scalance)# commit apply