Siemens SCALANCE W1750D UI

Wireless Network Profiles
11.1 Configuring Wireless Network Profiles
SCALANCE W1750D UI
116 Configuration Manual, 02/2018, C79000-G8976-C451-02
Temporal Diversity and Maximum Retries using CLI
When clients are not responding to 802.11 packets with the
temporal- diversity
parameter
disabled, which is the default setting, APs can attempt only hardware retries. But if this
parameter is enabled when the clients are not responding to 802.11 packets, APs can
perform two hardware retries. When the hardware retry attempts fail, APs can perform
software retries.
The
max-retries
parameter indicates the maximum number of attempts the AP performs
when clients are not responding to 802.11 packets. By default, the AP attempts a maximum
of eight retries when clients are not responding to 802.11 packets.
The following example shows the configuration of
temporal-diversity
and
max-retries
in a
WLAN SSID profile:
(scalance) (config) # wlan ssid-profile Name
(scalance) (SSID Profile "Name") # temporal-diversity
(scalance) (SSID Profile "Name") # max-retries 3
(scalance) (SSID Profile "Name") # end
(scalance) # commit apply