Siemens SCALANCE W1750D UI

Wireless Network Profiles
11.1 Configuring Wireless Network Profiles
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
119
In the CLI
To manually assign VLANs for WLAN SSID users:
(scalance)(config)# wlan ssid-profile <name>
(scalance)(SSID Profile <name>)# vlan <vlan-ID>
(scalance)(SSID Profile <name>)# end
(scalance)# commit apply
To create a new VLAN assignment rule:
(scalance)(config)# wlan ssid-profile <name>
(scalance)(SSID Profile <name>)# set-vlan <attribute> {{contains|ends-
with|equals|matches- regular-expression|not-equals|starts-with} <operand>
<vlan>|value-of}
(scalance)(SSID Profile <name>)# end
(scalance)# commit apply
Enforcing DHCP
You can configure a WLAN SSID profile to enforce DHCP on AP clients. When DHCP is
enforced:
● A layer-2 user entry is created when a client associates with an AP.
● The client DHCP state and IP address are tracked.
● When the client obtains an IP address from DHCP, the DHCP state changes to complete.
● If the DHCP state is complete, a layer-3 user entry is created.
● When a client roams between the APs, the DHCP state and the client IP address will be
synchronized with the new AP.
By default, enforcing DHCP feature is disabled. To enforce DHCP:
(scalance)(config)# wlan ssid-profile <name> (scalance)(SSID Profile <name>)#
enforce-dhcp (scalance)(SSID Profile <name>)# end
(scalance)# commit apply