Siemens SCALANCE W1750D UI

Captive Portal for Guest Access
13.2 Configuring a WLAN SSID for Guest Access
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
169
In the CLI
To configure WLAN settings for an SSID profile:
(scalance)(config)# wlan ssid-profile <name>
(scalance)(SSID Profile <name>)# essid <ESSID-name>
(scalance)(SSID Profile <name>)# type <Guest>
(scalance)(SSID Profile <name>)# broadcast-filter <type>
(scalance)(SSID Profile <name>)# dtim-period <number-of-beacons>
(scalance)(SSID Profile <name>)# multicast-rate-optimization
(scalance)(SSID Profile <name>)# dynamic-multicast-optimization
(scalance)(SSID Profile <name>)# dmo-channel-utilization-threshold
(scalance)(SSID Profile <name>)# a-max-tx-rate <rate>
(scalance)(SSID Profile <name>)# a-min-tx-rate <rate>
(scalance)(SSID Profile <name>)# g-max-tx-rate <rate>
(scalance)(SSID Profile <name>)# g-min-tx-rate <rate>
(scalance)(SSID Profile <name>)# zone <zone>
(scalance)(SSID Profile <name>)# bandwidth-limit <limit>
(scalance)(SSID Profile <name>)# per-user-bandwidth-limit <limit>
(scalance)(SSID Profile <name>)# air-time-limit <limit>
(scalance)(SSID Profile <name>)# wmm-background-share <percentage-of-traffic_share>
(scalance)(SSID Profile <name>)# wmm-best-effort-share<percentage-of-traffic-share>
(scalance)(SSID Profile <name>)# wmm-video-share <percentage-of-traffic_share>
(scalance)(SSID Profile <name>)# wmm-voice-share <percentage-of-traffic_share>
(scalance)(SSID Profile <name>)# rf-band {<2.4>|<5.0>|<all>}
(scalance)(SSID Profile <name>)# content-filtering
(scalance)(SSID Profile <name>)# hide-ssid
(scalance)(SSID Profile <name>)# inactivity-timeout <interval>
(scalance)(SSID Profile <name>)# local-probe-req-thresh <threshold>
(scalance)(SSID Profile <name>)# max-clients-threshold <number-of-clients>
To manually assign VLANs for WLAN SSID users:
(scalance)(config)# wlan ssid-profile <name>
(scalance)(SSID Profile <name>)# vlan <vlan-ID>
To create a new VLAN assignment rule:
(scalance)(config)# wlan ssid-profile <name>
(scalance)(SSID Profile <name>)# set-vlan <attribute>{equals|not-equals|starts-
with|ends- with|contains|matches-regular-expression} <operator> <VLAN-ID>|value-of}