Siemens SCALANCE W1750D UI User Manual

Services
24.1 Configuring AirGroup
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
391
clusters. The DNS records in the VC can be shared with all the VC configured for L3
Mobility.
By default, this feature is disabled. To define clusters, go to the
System > L3 Mobility
tab.
7. Ensure that the required AirGroup services are selected. To add any service, click
New
and add. To allow all services, select
allowall
. If a custom service is added, you can add a
corresponding service ID by clicking
New
under
Service ID
.
Note
If an AP is upgraded to the current release with the Bonjour
check box enabled, ensure
that the corresponding
Bonjour services are selected.
Note
SCALANCE W supports the use of up to 6 custom services.
8. Based on the services configured, you can block any user roles from accessing an
AirGroup service and restrict the AirGroup servers connected to a specific set of VLANs
from being discovered . The user roles and VLANs marked as disallowed are prevented
from accessing the corresponding AirGroup service. You can create a list of disallowed
user roles and VLANs for all AirGroup services configured on the AP. For example, If the
AirPlay service is selected, the
edit
links for the
airplay disallowed roles
and
airplay
disallowed vlans
are displayed. Similarly, if sharing service is selected, the
edit
links for
the
sharing disallowed roles
and
sharing disallowed vlans
are displayed.
– To block user roles from accessing an AirGroup service, click the corresponding
edit
link and select the user roles for which you want to restrict access. By default, an
AirGroup service is accessible by all user roles configured in your AP cluster.
– To block VLANs from allowing access to an AirGroup service, click the corresponding
edit
link and select the VLANs to exclude. By default, the AirGroup services are
accessible by users or devices in all VLANs configured in your AP cluster.
9.
ClearPass Settings
—Use this section to configure the ClearPass Policy Manager server,
CoA server, and enforce ClearPass registering.
–
CPPM server 1
—Indicates the ClearPass Policy Manager server information for
AirGroup policy.
–
Enforce ClearPass registering
—When enabled, only devices registered with
ClearPass Policy Manager will be discovered by Bonjour devices, based on the
ClearPass Policy Manager policy.
In the CLI
To configure AirGroup:
(scalance)(config)# airgroup
(scalance)(airgroup)# enable [dlna-only | mdns-only]
(scalance)(airgroup)# cppm enforce-registration
(scalance)(airgroup)# cppm-server <server>
(scalance)(airgroup)# cppm-query-interval <interval>
(scalance)(airgroup)# disallow-vlan <vlan-ID>

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English