Siemens SCALANCE W1750D UI User Manual

AP Management and Monitoring
25.2 Configuring Organization String
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
423
Standard DHCP Options 60 and 43 on Windows Server 2008
In networks that are not using DHCP options 60 and 43, it is easy to use the standard DHCP
options 60 and 43 for an AP or AP. For APs, these options can be used to indicate the
master controller or the local controller. For APs, these options can be used to define the
AirWave IP, group, password, and domain name.
1. From a server running Windows Server 2008, navigate to
Server Manager > Roles >
DHCP sever > domain > DHCP Server > IPv4
.
2. Right-click
IPv4
and select
Set Predefined Options
.
3. Select
DHCP Standard Options
in the
Option class
drop-down list and then click
Add
.
4. Enter the following information:
● Name — Instant
● Data Type — String
● Code — 60
● Description — InstantAP
5. Navigate to Server Manager and select Server Options in the IPv4 window. (This sets the
value globally. Use options on a per-scope basis to override the global options.)
6. Right-click
Server Options
and select the configuration options.
7. Select
060 Aruba Instant AP
in the
Server Options
window and enter
ArubaInstant
AP in
the
String value
text box.
8. Select
043 Vendor Specific Info
and enter a value for either of the following in the ASCII
text box:
●
airwave-orgn, airwave-ip, airwave-key
; for example:Siemens,192.0.2.20, 12344567
●
airwave-orgn, airwave-domain
; for example: Siemens, support.industry.siemens.com
This creates DHCP options 60 and 43 on a global basis. You can do the same on a per-
scope basis. The per- scope option overrides the global option.

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English