Siemens SCALANCE W1750D UI User Manual

Mobility and Client Management
29.2 Configuring L3-Mobility
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
459
7. Click
New
in the
Subnets
section and specify the following:
– Enter the client subnet in the
IP address
text box.
– Enter the mask in the
Subnet mask
text box.
– Enter the VLAN ID of the home network in the
VLAN ID
text box.
– Enter the home VC IP address for this subnet in the
Virtual controller IP
text box.
8. Click
OK
.
In the CLI
To configure a mobility domain:
(scalance)(config)# l3-mobility
(scalance)(L3-mobility)# home-agent-load-balancing
(scalance)(L3-mobility)# virtual-controller <IP-address>
(scalance)(L3-mobility)# subnet <IP-address> <subnet-mask> <VLAN-ID> <virtual-
controller-IP- address>
(scalance)(L3-mobility)# end
(scalance)# commit apply

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English