AP Maintenance
31.3 Converting an AP to a Remote AP and Campus AP
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
475
To convert an AP to a Remote AP:
1. Click Maintenance in the SCALANCE W main window.
2. Click the Convert tab. The Convert tab contents are displayed.
Figure 31-1 Maintenance—Convert Tab
3. Select Remote APs managed by a Mobility Controller from the drop-down list.
4. Enter the host name (fully qualified domain name) or the IP address of the controller in
the Hostname or IP Address of Mobility Controller text box. Contact your local network
administrator to obtain the IP address.
Note
Ensure that the Mobility Controller IP address is reachable by the APs.
To Next Page
Loading...
Need help?
General
