AP Maintenance
31.3 Converting an AP to a Remote AP and Campus AP
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
477
To deploy an AP as a stand-alone or autonomous AP:
1. Click
in the SCALANCE W main window.
2. Click the
tab. The
tab contents are displayed.
Figure 31-3 Stand-Alone AP Conversion
3. Select
from the drop-down list.
4. Select the Access Point from the
drop-down list.
5. Click
to complete the conversion. The AP now operates in the stand-alone
mode.
Converting an AP using CLI
To convert an AP to a remote AP or campus AP:
(scalance)# convert-aos-ap <mode> <controller-IP-address>
To convert an AP to a stand-alone AP or to provision an AP in the cluster mode:
(scalance)# swarm-mode <mode>
To Next Page
Loading...
Need help?
General
