Siemens SCALANCE W1750D UI

SCALANCE W User Interface
6.2 Main Window
SCALANCE W1750D UI
62 Configuration Manual, 02/2018, C79000-G8976-C451-02
Info
The Info section displays the configuration information of the VC by default. On selecting the
Network View tab, the monitoring pane displays configuration information of the selected
network. Similarly, in the Access Point or the Client view, this section displays the
configuration information of the selected AP or the client.
Name
Description
Info section in the Virtual
Controller view
The Info section in the Virtual Controller view displays the following information:
•
Name
— Displays the VC name.
• l
Country Code
— Displays the Country in which the VC is operating.
•
Virtual Controller IP address
— Displays the IP address of the VC.
•
VC DNS
— Displays the DNS IP address configured for the VC.
•
Management
— Indicates if the AP is managed locally or through AirWave.
•
Master
— Displays the IP address of the AP acting as VC.
•
OpenDNS Status
— Displays the OpenDNS status. If the OpenDNS status indicates
Not Connected, ensure that the network connection is up and appropriate credentials
are configured for OpenDNS.
•
MAS integration
— Displays the status of the Mobility Access Switch (MAS) integration
feature.
•
Uplink type
— Displays the type of uplink configured on the AP, for example, Ethernet
or 3G.
•
Uplink status
— Indicates the uplink status.
•
Blacklisted clients
— Displays the number of blacklisted clients.
•
Internal RADIUS Users
— Displays the number of internal RADIUS users.
•
Internal Guest Users
— Displays the number of internal guest users.
•
Internal User Open Slots
— Displays the available slots for user configuration as sup-
ported by the AP model.
Info section in the Net-
workview
The Info section in the Network view displays the following information:
•
Name
— Displays the name of the network.
•
Status
— Displays the status of the network.l Type—Displays the type of network, for
example, Employee, Guest, or Voice.
•
VLAN
— Displays VLAN details.
•
IP Assignment
— Indicates if the AP clients are assigned IP address from the network
that the VC is connected to, or from an internal autogenerated IP scope from the VC.
•
Access
— Indicates the level of access control configured for the network.
•
WMM DSCP
— Displays Wi-Fi Multemedia (WMM) DSCP mapping details.
•
Security level
— Indicates the type of user authentication and data encryption config-
ured for the network.The info section for WLAN SSIDs also indicates status of captive
portal and CALEA ACLs and provides a link to upload certificates for the internal server.
For more information, see Uploading Certificates (Page 238).