519DME Special Effect Operations
Chapter 11 DME Operations
• When Rectangle, Star, Heart, or Ellipse was selected in step 1
To make the fragments stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
To set the explosion center point
1
Press [Position], turning it on.
2
Set the following parameters.
Swirl settings
You can set the amount of swirl, the swirl region, the amount of rotation, and
the swirl center position.
To apply the Swirl effect
With the Swirl menu displayed, set the following parameters.
3 Spiral Degree of curvature of transition
path
–100.00 to +100.00
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Transition Degree of transition 0.00 to 100.00
2 Curve Degree to which image periphery
expands
0.00 to 100.00
3 Aspect Aspect ratio of waveform –100.00 to +100.00
4 Angle Slant of waveform –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 Density Degree to which image
disappears
0.00 to 100.00
2 Random Degree of randomness in flying
out fragment positions
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Center point in horizontal
direction
–5.000 to +5.000
2 V Center point in vertical direction –4.000 to +4.000
Knob Parameter Adjustment Setting values
1 Transition Swirl amount 0.00 to 100.00
To Next Page