ST STM32F2 User Manual

HAL ETH Generic Driver
UM1940
226/1371
DocID028236 Rev 2
None
__HAL_ETH_INITIATE_PAUSE_CONTRO
L_FRAME
Description:
Initiate a Pause Control Frame (Full-
duplex only).
Parameters:
__HANDLE__: ETH Handle
Return value:
None
__HAL_ETH_GET_FLOW_CONTROL_BU
SY_STATUS
Description:
Checks whether the ETHERNET flow
control busy bit is set or not.
Parameters:
__HANDLE__: ETH Handle
Return value:
The: new state of flow control busy
status bit (SET or RESET).
__HAL_ETH_BACK_PRESSURE_ACTIVA
TION_ENABLE
Description:
Enables the MAC Back Pressure
operation activation (Half-duplex only).
Parameters:
__HANDLE__: ETH Handle
Return value:
None
__HAL_ETH_BACK_PRESSURE_ACTIVA
TION_DISABLE
Description:
Disables the MAC BackPressure
operation activation (Half-duplex only).
Parameters:
__HANDLE__: ETH Handle
Return value:
None
__HAL_ETH_MAC_GET_FLAG
Description:
Checks whether the specified
ETHERNET MAC flag is set or not.
Parameters:
__HANDLE__: ETH Handle
__FLAG__: specifies the flag to check.
This parameter can be one of the
following values:
ETH_MAC_FLAG_TST : Time
stamp trigger flag

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English