ST STM32F2 - Page 227

UM1940
HAL ETH Generic Driver
DocID028236 Rev 2
227/1371
ETH_MAC_FLAG_MMCT : MMC
transmit flag
ETH_MAC_FLAG_MMCR : MMC
receive flag
ETH_MAC_FLAG_MMC : MMC
flag
ETH_MAC_FLAG_PMT : PMT flag
Return value:
The: state of ETHERNET MAC flag.
__HAL_ETH_DMA_ENABLE_IT
Description:
Enables the specified ETHERNET DMA
interrupts.
Parameters:
__HANDLE__: : ETH Handle
__INTERRUPT__: specifies the
ETHERNET DMA interrupt sources to
be enabled
Return value:
None
__HAL_ETH_DMA_DISABLE_IT
Description:
Disables the specified ETHERNET DMA
interrupts.
Parameters:
__HANDLE__: : ETH Handle
__INTERRUPT__: specifies the
ETHERNET DMA interrupt sources to
be disabled.
Return value:
None
__HAL_ETH_DMA_CLEAR_IT
Description:
Clears the ETHERNET DMA IT pending
bit.
Parameters:
__HANDLE__: : ETH Handle
__INTERRUPT__: specifies the interrupt
pending bit to clear.
Return value:
None
__HAL_ETH_DMA_GET_FLAG
Description:
Checks whether the specified
ETHERNET DMA flag is set or not.
Parameters: