ST STM32F2

HAL RTC Generic Driver
UM1940
478/1371
DocID028236 Rev 2
None
__HAL_RTC_ALARM_DISABLE_IT
Description:
Disable the RTC Alarm
interrupt.
Parameters:
__HANDLE__: specifies
the RTC handle.
__INTERRUPT__:
specifies the RTC Alarm
interrupt sources to be
enabled or disabled. This
parameter can be any
combination of the
following values:
RTC_IT_ALRA:
Alarm A interrupt
RTC_IT_ALRB:
Alarm B interrupt
Return value:
None
__HAL_RTC_ALARM_GET_IT
Description:
Check whether the
specified RTC Alarm
interrupt has occurred or
not.
Parameters:
__HANDLE__: specifies
the RTC handle.
__INTERRUPT__:
specifies the RTC Alarm
interrupt to check. This
parameter can be:
RTC_IT_ALRA:
Alarm A interrupt
RTC_IT_ALRB:
Alarm B interrupt
Return value:
None
__HAL_RTC_ALARM_GET_FLAG
Description:
Get the selected RTC
Alarm's flag status.
Parameters:
__HANDLE__: specifies
the RTC handle.
__FLAG__: specifies the
RTC Alarm Flag to check.