ST STM32F2

UM1940
HAL RTC Generic Driver
DocID028236 Rev 2
477/1371
__HAL_RTC_ALARMA_DISABLE
Description:
Disable the RTC ALARMA
peripheral.
Parameters:
__HANDLE__: specifies
the RTC handle.
Return value:
None
__HAL_RTC_ALARMB_ENABLE
Description:
Enable the RTC ALARMB
peripheral.
Parameters:
__HANDLE__: specifies
the RTC handle.
Return value:
None
__HAL_RTC_ALARMB_DISABLE
Description:
Disable the RTC ALARMB
peripheral.
Parameters:
__HANDLE__: specifies
the RTC handle.
Return value:
None
__HAL_RTC_ALARM_ENABLE_IT
Description:
Enable the RTC Alarm
interrupt.
Parameters:
__HANDLE__: specifies
the RTC handle.
__INTERRUPT__:
specifies the RTC Alarm
interrupt sources to be
enabled or disabled. This
parameter can be any
combination of the
following values:
RTC_IT_ALRA:
Alarm A interrupt
RTC_IT_ALRB:
Alarm B interrupt
Return value: