ST STM32F2 - Page 503

UM1940
HAL RTC Extension Driver
DocID028236 Rev 2
503/1371
RTC TimeStamp Edges Definitions
RTC_TIMESTAMPEDGE_RISING
RTC_TIMESTAMPEDGE_FALLING
RTC WakeUp Timer
__HAL_RTC_WAKEUPTIMER_ENABLE
Description:
Enable the RTC WakeUp
Timer peripheral.
Parameters:
__HANDLE__: specifies the
RTC handle.
Return value:
None
__HAL_RTC_WAKEUPTIMER_DISABLE
Description:
Disable the RTC Wake-up
Timer peripheral.
Parameters:
__HANDLE__: specifies the
RTC handle.
Return value:
None
__HAL_RTC_WAKEUPTIMER_ENABLE_IT
Description:
Enable the RTC WakeUpTimer
interrupt.
Parameters:
__HANDLE__: specifies the
RTC handle.
__INTERRUPT__: specifies
the RTC WakeUpTimer
interrupt sources to be enabled
or disabled. This parameter
can be:
RTC_IT_WUT:
WakeUpTimer A interrupt
Return value:
None
__HAL_RTC_WAKEUPTIMER_DISABLE_IT
Description:
Disable the RTC
WakeUpTimer interrupt.
Parameters:
__HANDLE__: specifies the
RTC handle.
__INTERRUPT__: specifies