ST STM32F2 - Page 504

HAL RTC Extension Driver
UM1940
504/1371
DocID028236 Rev 2
the RTC WakeUpTimer
interrupt sources to be enabled
or disabled. This parameter
can be:
RTC_IT_WUT:
WakeUpTimer A interrupt
Return value:
None
__HAL_RTC_WAKEUPTIMER_GET_IT
Description:
Check whether the specified
RTC WakeUpTimer interrupt
has occurred or not.
Parameters:
__HANDLE__: specifies the
RTC handle.
__INTERRUPT__: specifies
the RTC WakeUpTimer
interrupt to check. This
parameter can be:
RTC_IT_WUT:
WakeUpTimer A interrupt
Return value:
None
__HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE
Description:
Check whether the specified
RTC Wake Up timer interrupt
has been enabled or not.
Parameters:
__HANDLE__: specifies the
RTC handle.
__INTERRUPT__: specifies
the RTC Wake Up timer
interrupt sources to check.
This parameter can be:
RTC_IT_WUT:
WakeUpTimer interrupt
Return value:
None
__HAL_RTC_WAKEUPTIMER_GET_FLAG
Description:
Get the selected RTC
WakeUpTimer's flag status.
Parameters:
__HANDLE__: specifies the
RTC handle.
__FLAG__: specifies the RTC