ST STM32F2 User Manual

UM1940
HAL RTC Extension Driver
DocID028236 Rev 2
505/1371
WakeUpTimer Flag to check.
This parameter can be:
RTC_FLAG_WUTF
RTC_FLAG_WUTWF
Return value:
None
__HAL_RTC_WAKEUPTIMER_CLEAR_FLAG
Description:
Clear the RTC Wake Up
timer's pending flags.
Parameters:
__HANDLE__: specifies the
RTC handle.
__FLAG__: specifies the RTC
Tamper Flag sources to be
enabled or disabled. This
parameter can be:
RTC_FLAG_WUTF
Return value:
None
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT
Description:
Enable interrupt on the RTC
Wake-up Timer associated Exti
line.
Return value:
None
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT
Description:
Disable interrupt on the RTC
Wake-up Timer associated Exti
line.
Return value:
None
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_
EVENT
Description:
Enable event on the RTC
Wake-up Timer associated Exti
line.
Return value:
None.
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_
EVENT
Description:
Disable event on the RTC
Wake-up Timer associated Exti
line.
Return value:

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English