ST STM32F2 User Manual

UM1940
HAL TIM Generic Driver
DocID028236 Rev 2
615/1371
DMA request
TIM_DMA_CC3: Capture/Compare 3
DMA request
TIM_DMA_CC4: Capture/Compare 4
DMA request
TIM_DMA_COM: Commutation DMA
request
TIM_DMA_TRIGGER: Trigger DMA
request
Return value:
None
__HAL_TIM_DISABLE_DMA
Description:
Disable the specified DMA request.
Parameters:
__HANDLE__: specifies the TIM Handle.
__DMA__: specifies the TIM DMA request
to disable. This parameter can be one of
the following values:
TIM_DMA_UPDATE: Update DMA
request
TIM_DMA_CC1: Capture/Compare 1
DMA request
TIM_DMA_CC2: Capture/Compare 2
DMA request
TIM_DMA_CC3: Capture/Compare 3
DMA request
TIM_DMA_CC4: Capture/Compare 4
DMA request
TIM_DMA_COM: Commutation DMA
request
TIM_DMA_TRIGGER: Trigger DMA
request
Return value:
None
__HAL_TIM_GET_FLAG
Description:
Check whether the specified TIM interrupt
flag is set or not.
Parameters:
__HANDLE__: specifies the TIM Handle.
__FLAG__: specifies the TIM interrupt flag
to check. This parameter can be one of the
following values:
TIM_FLAG_UPDATE: Update interrupt
flag
TIM_FLAG_CC1: Capture/Compare 1
interrupt flag
TIM_FLAG_CC2: Capture/Compare 2
interrupt flag

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English