ST STM32F2 - Page 616

HAL TIM Generic Driver
UM1940
616/1371
DocID028236 Rev 2
TIM_FLAG_CC3: Capture/Compare 3
interrupt flag
TIM_FLAG_CC4: Capture/Compare 4
interrupt flag
TIM_FLAG_CC5: Compare 5 interrupt
flag
TIM_FLAG_CC6: Compare 6 interrupt
flag
TIM_FLAG_COM: Commutation
interrupt flag
TIM_FLAG_TRIGGER: Trigger
interrupt flag
TIM_FLAG_BREAK: Break interrupt
flag
TIM_FLAG_BREAK2: Break 2
interrupt flag
TIM_FLAG_SYSTEM_BREAK:
System Break interrupt flag
TIM_FLAG_CC1OF:
Capture/Compare 1 overcapture flag
TIM_FLAG_CC2OF:
Capture/Compare 2 overcapture flag
TIM_FLAG_CC3OF:
Capture/Compare 3 overcapture flag
TIM_FLAG_CC4OF:
Capture/Compare 4 overcapture flag
Return value:
The: new state of __FLAG__ (TRUE or
FALSE).
__HAL_TIM_CLEAR_FLAG
Description:
Clear the specified TIM interrupt flag.
Parameters:
__HANDLE__: specifies the TIM Handle.
__FLAG__: specifies the TIM interrupt flag
to clear. This parameter can be one of the
following values:
TIM_FLAG_UPDATE: Update interrupt
flag
TIM_FLAG_CC1: Capture/Compare 1
interrupt flag
TIM_FLAG_CC2: Capture/Compare 2
interrupt flag
TIM_FLAG_CC3: Capture/Compare 3
interrupt flag
TIM_FLAG_CC4: Capture/Compare 4
interrupt flag
TIM_FLAG_CC5: Compare 5 interrupt
flag
TIM_FLAG_CC6: Compare 6 interrupt
flag
TIM_FLAG_COM: Commutation