ST STM32F2 User Manual

LL ADC Generic Driver
UM1940
766/1371
DocID028236 Rev 2
LL_ADC_FLAG_EOCS_SLV1
ADC flag ADC multimode slave 1 group regular end of
unitary conversion or sequence conversions (to configure
flag of end of conversion, use function
LL_ADC_FLAG_EOCS_SLV2
ADC flag ADC multimode slave 2 group regular end of
unitary conversion or sequence conversions (to configure
flag of end of conversion, use function
LL_ADC_FLAG_OVR_MST
ADC flag ADC multimode master group regular overrun
LL_ADC_FLAG_OVR_SLV1
ADC flag ADC multimode slave 1 group regular overrun
LL_ADC_FLAG_OVR_SLV2
ADC flag ADC multimode slave 2 group regular overrun
LL_ADC_FLAG_JEOS_MST
ADC flag ADC multimode master group injected end of
sequence conversions (Note: on this STM32 serie, there
is no flag ADC group injected end of unitary conversion.
Flag noted as "JEOC" is corresponding to flag "JEOS" in
other STM32 families)
LL_ADC_FLAG_JEOS_SLV1
ADC flag ADC multimode slave 1 group injected end of
sequence conversions (Note: on this STM32 serie, there
is no flag ADC group injected end of unitary conversion.
Flag noted as "JEOC" is corresponding to flag "JEOS" in
other STM32 families)
LL_ADC_FLAG_JEOS_SLV2
ADC flag ADC multimode slave 2 group injected end of
sequence conversions (Note: on this STM32 serie, there
is no flag ADC group injected end of unitary conversion.
Flag noted as "JEOC" is corresponding to flag "JEOS" in
other STM32 families)
LL_ADC_FLAG_AWD1_MST
ADC flag ADC multimode master analog watchdog 1 of
the ADC master
LL_ADC_FLAG_AWD1_SLV1
ADC flag ADC multimode slave 1 analog watchdog 1
LL_ADC_FLAG_AWD1_SLV2
ADC flag ADC multimode slave 2 analog watchdog 1
ADC instance - Groups
LL_ADC_GROUP_REGULAR
ADC group regular (available on all STM32
devices)
LL_ADC_GROUP_INJECTED
ADC group injected (not available on all
STM32 devices)
LL_ADC_GROUP_REGULAR_INJECTED
ADC both groups regular and injected
Definitions of ADC hardware constraints delays
LL_ADC_DELAY_VREFINT_STAB_US
Delay for internal voltage reference
stabilization time
LL_ADC_DELAY_TEMPSENSOR_STAB_US
Delay for internal voltage reference
stabilization time
ADC group injected - Sequencer discontinuous mode
LL_ADC_INJ_SEQ_DISCONT_DISABLE
ADC group injected sequencer discontinuous
mode disable
LL_ADC_INJ_SEQ_DISCONT_1RANK
ADC group injected sequencer discontinuous
mode enable with sequence interruption every
rank

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English