ST STM32F2

LL DAC Generic Driver
UM1940
850/1371
DocID028236 Rev 2
bit0, for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS1_0
Noise wave generation, unmask LFSR
bits[1:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS2_0
Noise wave generation, unmask LFSR
bits[2:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS3_0
Noise wave generation, unmask LFSR
bits[3:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS4_0
Noise wave generation, unmask LFSR
bits[4:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS5_0
Noise wave generation, unmask LFSR
bits[5:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS6_0
Noise wave generation, unmask LFSR
bits[6:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS7_0
Noise wave generation, unmask LFSR
bits[7:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS8_0
Noise wave generation, unmask LFSR
bits[8:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS9_0
Noise wave generation, unmask LFSR
bits[9:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS10_0
Noise wave generation, unmask LFSR
bits[10:0], for the selected DAC channel
LL_DAC_NOISE_LFSR_UNMASK_BITS11_0
Noise wave generation, unmask LFSR
bits[11:0], for the selected DAC channel
DAC wave generation - Triangle amplitude
LL_DAC_TRIANGLE_AMPLITUDE_1
Triangle wave generation, amplitude of 1 LSB
of DAC output range, for the selected DAC
channel
LL_DAC_TRIANGLE_AMPLITUDE_3
Triangle wave generation, amplitude of 3 LSB
of DAC output range, for the selected DAC
channel
LL_DAC_TRIANGLE_AMPLITUDE_7
Triangle wave generation, amplitude of 7 LSB
of DAC output range, for the selected DAC
channel
LL_DAC_TRIANGLE_AMPLITUDE_15
Triangle wave generation, amplitude of 15 LSB
of DAC output range, for the selected DAC
channel
LL_DAC_TRIANGLE_AMPLITUDE_31
Triangle wave generation, amplitude of 31 LSB
of DAC output range, for the selected DAC
channel
LL_DAC_TRIANGLE_AMPLITUDE_63
Triangle wave generation, amplitude of 63 LSB
of DAC output range, for the selected DAC
channel
LL_DAC_TRIANGLE_AMPLITUDE_127
Triangle wave generation, amplitude of 127
LSB of DAC output range, for the selected
DAC channel