EasyManua.ls Logo

Still RX50-13 - Checking the Brake System for Correct Function

Still RX50-13
374 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation 5
Commissioning
CAUTION
The seat belt may be damaged by heat!
Do not subject the buckle or belt retractor to exces-
sive heat when thawing.
Do not use air warmer than 60 °C when thawing
out!
1
5060_003-015
Checking the brake system for
correct function
DANGER
If the brake system fails, the truck is insufficiently
braked or not braked at all, so there is a risk of
accident!
Do not commission trucks with a defective brake
system.
Checking the foot brake
Check pedal clearance:
There must be a distance of at least 60 mm
between the pressure point and the pedal
stop.
Accelerate the truck without a load in a clear
area; see "Driving" chapter.
Press the brake pedal (1) firmly.
The truck must decelerate noticeably.
55
048011501 EN - 12/2015 99

Table of Contents

Related product manuals