5 Operation
Working with loads
6210_003-073_en
3
When the load measurement has been carried
out correctly, the determined load weight is
displayed in the operating unit.
NOTE
If the load measurement is in
valid, the value
"-9999 kg" is displayed in t
he operating unit.
Picking up loads
To make sure that the load is securely sup-
ported, it must be ensured that the fork arms
are sufficiently far apart and are positioned as
far as possible under the load.
If possible, the load should rest on the back of
the fork.
The load must not
protrude too far over the
fork tips, nor sh
ould the fork tips protrude too
far out from the l
oad.
Loads are to be picked up and transported as
close to the middle as possible.
DANGER
Risk of accident from a falling load!
When transporting small items, attach a load safety
guard (variant) to prevent the load from falling on
the driver.
Aclosedroofcovering(variant)shouldalsobe
used.
Removable roof panels may not be removed.
15
2 55048011501 EN - 12/2015
To Next Page
Loading...
