Maintenance 6
General maintenance information
Maintenance — 1000 hours/annually
At operating hours
1000 2000 4000 5000 7000
Carried
out
8000 10000 11000 13000 14000
Chassis, bodywork and fittings
Check chassis for cracks
Check overhead guard/cab and panes of glass for damage
Check controls, switches and joints for damage, and apply grease and oil
Check the accelerator pedal and brake pedal for damage and function, and lubricate
Check driver’s seat for correct function and for damage
Check driver restraint system for correct function and for damage, and clean.
Check battery hood, interlock and sensor for correct function and for damage
Check the dual pedal variant for damage and function, and lubricate
Tyres and wheels
Check tyres for wear and check the air pressure
Check wheels for damage and check the tightening torques
Power unit
Drive unit: Check that it is securely attached and check for leaks
Gearbox oil: Check oil level
Steering
Check the steering system for correct function and for leaks
Check that the steering wheel is securely attached and check the turning handle for
damage
Check the steering stop
Check steering chain; if necessary, adjust the tension and apply oil
Brake
Check all mechanical brake parts for condition, wear and correct function
Check the brake fluid level
Check brake fluid switch for correct function
Carry out brake test
Ele
ctrical system
Check all power cable connections
Check main contactor contacts
55
048011501 EN - 12/2015 297
To Next Page
Loading...
