5 Operation
Commissioning
NOTE
Additional information may ap
pear on the dis-
play. If malfunctions occur, r
efer to the infor-
mation in the chapter entitled
"Malfunctions".
Access authorisation with
PIN code
(variant)
Description
Trucks equipped with the "Access authori-
sation with PIN code" variant are protected
against unauthorised use by a five-digit driver
PIN. Up to fifty different driver PINs can be
defined so that the same truck can be used
by different drivers, each with their own driver
PIN.
NOTE
The driver PINs are defi
ned in a truck control
unit menu that can onl
y be accessed by
persons with the corr
esponding access
authorisation, e.g.
fleet managers.
Once the key switch has been switched on,
the input menu for the driver PIN appears
on the display and operating unit screen. All
of the truck’s functions (driving, hydraulics,
additional electrical installations and the
display and operating unit displays) are
blocked. The function of the hazard warning
system (variant) is guaranteed. Enter the five-
digit driver PIN (possible entries from 00000 to
99999) to enable the blocked functions. Once
the correct driver PIN has been entered, the
standard displays are shown. All of the truck
functions are available.
The access authorisation can be configured
in such a way that the driver PIN has to be
re-entered each time the driver steps off the
truck, in order for the truck to be operated
again.
– Contact the author
ised service centre on
this matter.
The first driver PIN is preset to "11111" at the
factory. All others are preset to "0xFFF" but
have no function as the highest valid driver PIN
86
55048011501 EN - 12/2015
To Next Page
Loading...
