EasyManua.ls Logo

Still RX50-13 - Maintenance - 3000 Hours;Every Two Years; Ordering Spare Parts and Wearing Parts; Quality and Quantity of the Required Operating Materials

Still RX50-13
374 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance 6
General maintenance information
Maintenance - 3000 hours/every two years
At operating hours
Carried
out
3000 6000 9000 12000 15000
Note
Perform all 1000-hour maintenance work
Power unit
Change the gearbox oil
Brake
Change the brake fluid
Hydraulics
Change the hydraulic oil.
Replace the return line filter, breather filter and high-pressure filter (variant)
Ordering spare parts and wearing
parts
Spare parts are provided by our spare parts
service department. The information required
for ordering parts can be found in the spare
parts list.
Only use spare parts as per the manufac-
turer’s instructions. The use of unapproved
spare parts can result in an increased risk of
accidents due to insufficient quality or incor-
rect assignment. Anyone using unapproved
spare parts shall assume unlimited liability in
the event of damage or harm.
Quality and quantity of the required
operating materials
Only the operating materials specified in the
maintenance data table may be used.
The require
d consumables and lubricants
can be found
in the maintenance data table.
Oil and grease types of a different quality
must not be mixed. This negatively affects
the lubricity. If a change between different
55
048011501 EN - 12/2015 301

Table of Contents

Related product manuals