Operation 5
Cold store application
6210_900-002
Cold store application
The truck features cold store equipment
(variant), making it suitable for use in cold
stores.
It is equipped for two differe
nt types of applica-
tion and marked with the col
d store symbol.
Cold store-compatible oils (for hydraulics
and gearbox) and greases (for moving parts,
gearing and chains) are used with the cold
store equipment.
Permissible use
Type of application 1:
• Constant deployment in t
emperature range
-5 °C, brief deployment d
ownto-10°C.
Type of application 2:
• Alternating between indoor use down to
-32 °C and for outdoor use +25 °C, briefly
up to +40 °C. For this application, cold
store-compatible hydraulic oil must be
used according to the maintenance data
table; see ⇒ Chapter "Maintenance data
table", P. 6-303.
Operation
CAUTION
Changing from a cold inside temperature to a warm
outside temperature may result in the formation
of condensation water. This water may freeze on
re-entering the cold store, blocking moving parts of
the truck.
It is essential that close attention is paid to the
duration of deployment in the different temperature
ranges for both types of application.
Before being used in the cold store, the truck must
be dry and warmed up.
The truck should not leave the cold store area for
more than 10 minutes. By adhering to this rule,
condensation water will not have time to form.
If the truck stays outside for longer than 10 minutes,
it must remain there at least until the condensation
water has drained off and the truck has dried off.
Depending on the weather, this will take at least 30
minutes.
55
048011501 EN - 12/2015 211
To Next Page
Loading...
