Introduction 2
Residual risk
Hazard Measure
Check note
√ Complete
- Not applicable
Notes
Driveways intersect
Announce right-of-
way rule
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
No person detection
during depositing and
retrieval
Employee training
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
.
Danger to employees
According to the German Ordinance on Indus-
trial Safety and Health (BetrSichV) and labour
protection law (ArbSchG), the operating com-
pany must determine and assess hazards
during operation, and establish the labour
protection measures required for employ-
ees (BetrSichVO). The operating company
must therefore draw up appropriate operating
instructions (§ 6 ArbSchG) and make them
available to the driver. A responsible person
must be appointed.
NOTE
Please observe t
he definition of the following
responsible per
sons: "operating company"
and "driver".
The construction and equipment of the
truck correspond to the Machinery Directive
2006/42/EC and are therefore marked with
CE labelling. These elements are therefore
not included in the hazard assessment. At-
tachments possess their own CE labelling and
likewise are not included for that reason. The
operating company must, however, select the
type and equipment of the trucks so as to com-
ply with the local provisions for deployment.
The result must be documented (§ 6 Arb-
SchG). In the case of truck applications involv-
ing similar hazard situations, the results may
be summarised. This overview (see chapter
"Overview of hazards and countermeasures")
provides help on complying with this regula-
tion. The overview specifies the main hazards
that are the most frequent cause of accidents
in the event of non-compliance. If other major
55
048011501 EN - 12/2015 23
To Next Page
Loading...
