Operation 5
Operation in special operating sit
uations
Operation in special operating situations
Transporting
CAUTION
Danger of material damage from overloading!
If the truck is driven onto a means of transport,
the load capacity of the means of transport, the
ramps and loading bridges must be greater than
the actual total weight of the truck. Components
may be permanently deformed or damaged due to
overloading.
– Determine the actual total weight of the truck.
– Only load the truck if the load capacity of the
means of transport, the ramps and loading
bridges is greater than the actual total weight
of the truck.
Type-Modèle-Typ / Serial no.-No. de série-Serien-Nr. / year-année-Baujahr
Rated capacity
Capacité nominale
Nenn-Tragfähigkeit
Battery voltage
Tension batterie
Batteriespannung
Rated drive power
Puissance motr.nom.
Nenn-Antriebsleist.
Unladen mass
Masse à vide
Leergewicht
max
min.*
* see Operating instructions
voir Mode d'emploi
siehe Betriebsanleitung
kg
kg
kg
kg
kg
kW
V
*
1
3
2
6210_001-016_V2
Determining the actual total weight
– Park the truck securely.
– Determine the unit weights by reading the
truck nameplate and, if necessary, the
attachment (variant) nameplate.
– Add the determined unit weights to obtain
the actual total weight of the truck:
Tare weight (1)
+
Max. permissible battery weight (2)
+
Ballast weight (variant) (3)
+
Net weight of attachment (variant)
+
100 kg allowance for the driver
=
Actual total weight
55
048011501 EN - 12/2015 237
To Next Page
Loading...
