Operation 5
Handling the battery
NOTE
The apertures in the door are ne
cessary for
forced ventilation and must no
tbeblocked.
NOTE
If the internal roller chan
nel or battery bridge
(variant) is not locked cor
rectly, it is not
possible to close the batte
ry door.
– Close the battery door.
– Close the battery door securely by pushing
it into the engaged position.
– Ensure that the battery d
oor is shut se-
curely.
Disconnecting the batt
ery male
connector
CAUTION
Risk of component damage!
If you remove the battery male connector while
the key switch is switched on (under load), an arc
will be produced. This can lead to corrosion at the
contacts, which considerably shortens their service
life.
– Do not disconnect the battery male connector
while the key switch is switched on.
– Only disconnect the battery male connector
while the key switch is switched on in an emer-
gency.
– Open the battery door.
55
048011501 EN - 12/2015 261
To Next Page
Loading...
