5 Operation
Handling the battery
Changing the battery using the
internal roller channel
Activities before removal of the battery
DANGER
WARNING
If the truck is not parked on horizontal
ground, there is nothing to prevent
thebatteryrollingawayoncethelock
has been opened, leading to a risk of
crushing and shearing!
– The truck must be parked on
horizontal ground.
– People must not stand directly in
the battery’s direction of travel or in
the battery compartment.
– Do not place objects or any parts
of the body between the battery
and the truck chassis.
– Use only the handles that are
provided and identified.
– Park the truck securely.
– Switch off the key switch.
– Open the battery hood.
– Open the battery door.
CAUTION
Do not disconnect the battery male connector while
the key switch is switched on!
– Ensure that the key switch is switched off.
1
5060_003-051
– Disconnect the battery male connector (1)
from the plug connection by pulling in the
direction of the arrow.
27
0 55048011501 EN - 12/2015
To Next Page
Loading...
