Still RX50-13 - Controlling Attachments Using a Double Mini-Lever

5 Operation
Working with attachments
5060_003-113
A
C
B
D
1
5060_003-112_V2
A
C
B
D
Controlling attachments using a
double mini-lever
The attachments (variants) are controlled in
this version using the "attachments" cross
lever (1).
The pictograms on the "attachments" cross
lever show the respective functions that are
activated by this lever.
This essentially involve
s the following:
– Move the "attachments"(1) cross lever in
the direction of the arrow (A) .
The attachment moves in accordance with the
pictogram in position (A).
– Move the "attachments"
(1) cross lever in
the direction of the arr
ow (B) .
The attachment moves in accordance with the
pictogram in position (B).
– Move the "attachments"(1) cross lever in
the direction of the arrow (C) .
The attachment moves i
n accordance with the
pictogram in position
(C).
– Move the "attachments"(1) cross lever in
the direction of the arrow (D) .
The attachment moves in accordance with the
pictogram in position (D).
17
4 55048011501 EN - 12/2015