Safety 3
Safety tests
Safety tests
Regular safety inspection of the truck
Safetyinspectionbasedontimeand
extraordinary incidents
The operating company must ensure that the
truck is checked by a specialist at least once a
year or after particular incidents.
As part of this inspection
, a complete check
of the technical conditio
n of the truck must be
performed with regard to a
ccident safety.
In addition, the truck mus
t be thoroughly
checked for damage that co
uld potentially
have been caused by impro
per use. A test
log must be created. The r
esults from the
inspection must be retai
ned until a further two
inspections have been ca
rried out.
The inspection date is indicated by an adhe-
sive label on the truck.
– Arrange for the service centre to perform
periodic safety inspections on the truck.
– Observe guidelines fo
r checks carried out
on the truck in accorda
nce with FEM 4.004.
The operator is responsible for ensuring any
defects are remedied without delay.
– Contact your service centre.
NOTE
Observe the national regulations for your
country!
Insulation testing
The truck insulation must have sufficient insu-
lation resistance. For this reason, insulation
testing in accordance with DIN EN 1175 and
DIN 43539, VDE 0117 and VDE 0510 must be
conducted at least once a year.
NOTE
The truck’s el
ectrical system and drive batte-
ries must be ch
ecked separately.
55
048011501 EN - 12/2015 37
To Next Page
Loading...
