Operation 5
Cleaning
6210_810-004
Cleaning load chains
WARNING
Risk of accident!
Load chains are safety elements.
The use of cold/chemical cleaners or fluids that are
corrosive or contain acid or chlorine can damage
the chains and is forbidden!
– Observe the manufacturer’s guidelines for
working with cleaning materials.
– Place a collection vessel under the lift mast.
– Clean with paraffin derivatives, such as
benzine.
– When using a steam jet, do not use addi-
tional cleaning agents.
– Remove any water in the chain links using
compressed air immediately after cleaning.
Move the chain several times during this
procedure.
– Immediately after drying the chain, spray it
with chain spray. Move the chain several
times during this procedure.
For chain spray specifications, see the "Main-
tenance data table" chapter.
ENVIRONMENT NOTE
Dispose of any fluid that has been spilled
or collected in the collection vessel in an
environmentally friendly manner. Follow the
statutory regulations.
55
048011501 EN - 12/2015 291
To Next Page
Loading...
