6 Maintenance
1000-hour maintenance / Annual mai
ntenance
Checking the dual pedal
– Check the accelerator pedals for forwards
and reverse travel for damage and function.
– Remove the bottom plate; see ⇒ Chap-
ter "Removing/installing the bottom plate for
dual pedal operation (variant)", P. 6-313.
– Check that the support and sp
rings of the
mechanism are securely posi
tioned.
– Perform visual inspection to verify that
all screws are coated with retaining com-
pound.
7094_810-004
Checking the lift cylinders and
connections for leaks
WARNING
Risk of injury
Observe safety regulations for working on the lift
mast,seethe"Workingatthefrontofthetruck"
chapter.
– Check the hydraulic connections and lift
cylinder for leaks (visual inspection).
– Have leaking screw joints or leaking hy-
draulic cylinders repaired by the authorised
service centre.
33
4 55048011501 EN - 12/2015
To Next Page
Loading...
