Operation 5
Checks and operations prior to comm
issioning
5060_003-150_V2
– Open the filler cap (1) of the washer system
(variant).
– Fill the windscreen washer container with
washer fluid containing anti-freeze ac-
cording to the maintenance data table
(see ⇒ Chapter "Maintenance data ta-
ble", P. 6-303).
NOTE
Fill to a max. level of approx. 1 cm below the
filler neck.
– Close the filler cap.
– Operate washer system un
til washer fluid is
discharged from the spra
y nozzles.
Checking the cond
ition of the wheels
and tyres
WARNING
Risk of accident!
Uneven wear reduces the stability of the truck and
increases the braking distance.
– Renew left and right worn or damaged tyres
without delay.
WARNING
Risk of tipping!
Tyre quality affects the stability of the truck.
If you wish to use a different type of tyre on the truck
from the tyres approved by the truck manufacturer,
or tyres from a different manufacturer, you must first
obtain approval from the truck manufacturer.
WARNING
Risk to stability!
When using pneumatic tyres or solid rubber tyres,
rim wheel parts must never be changed and rim
wheel parts from different manufacturers must not
be mixed.
NOTE
Only approved types of tyre may be used; see
chapter entitled "Tyres".
55
048011501 EN - 12/2015 71
To Next Page
Loading...
