Maintenance 6
Maintenance
Maintenance
6210_606-030_V2
1
Lubricating the joints and controls
– Oil or grease other bearing points and
joints according to the maintenance data
table; see ⇒ Chapter "Maintenance data
table", P. 6-303.
• Driver’s seat guide
• Cab door hinges (variant)
• Battery door hinges or battery cover hinges
• Control linkage (1) for valves
Checking the battery hood lock
DANGER
The battery could fall on the driver — there is a risk
to life!
If the hood lock malfunctions and the truck tips over
or is subjected to sharp deceleration, the battery
hood can open and the battery can fall out.
– If the hood lock is deformed, damaged or stiff,
inform STILL Service immediately and do not
operate the truck.
– Always check the hood lock after an accident.
– Check the hood lock for secure function.
– Pivot points must be greased and move easily.
NOTE
The interval for greasing is influenced signifi-
cantly by the application conditions and envi-
ronmental conditions affecting the truck. As
required and after every 1000 hours, perform
a visual inspection and function check of the
hood lock. Grease all moving parts of the hood
lock if necessary.
55
048011501 EN - 12/2015 315
To Next Page
Loading...
