Maintenance 6
1000-hour maintenance / Annual mai
ntenance
1000-hour maintenance / Annual maintenance
Other tasks
– Perform all maintenance work; see the
"Maintenance" chapter.
Checking the cable connections
– Check that the feed cables of the pump
motor and traction motor are securely
attached, in good condition and insulated.
NOTE
Oxidised connections
and brittle cables result
in voltage drops and ca
use malfunctions.
– Remove oxidation residues and replace
brittle cables.
Checking accelerator pedal and
brake pedal
– Check the accelerator pedal and brake
pedal for damage and function.
– Remove the bottom plate as necessary and
lubricate the mechanism.
7311_003-012
Checking the brake system for
correct operation and leaks
– Perform a functional check of the brake
system; see ⇒ Chapter "Checking the brake
system for correct function", P. 5-99.
If you determin
e that the pedal stop is soft,
thepipelines
and hoses must be checked
for condition
and leaks and the brake system
must be bled.
– Contact your service centre.
DANGER
Risk of accident!
Do not put trucks with a defective brake system into
service.
55
048011501 EN - 12/2015 333
To Next Page
Loading...
