Operation 5
Commissioning
is "99999". Persons with the corresponding
access authorisation, e.g. fleet managers, can
change the driver PINs in the corresponding
menu.
NOTE
When first commissioning the truck, we re-
commend you change the access authorisa-
tion set at the factory. This is the only way to
guarantee that the driver PIN is only known to
persons with corresponding access authori-
sation.
The driver PINs are stored in the truck control
unit. These are still available if the display
and operating unit has been changed. The
authorised service centre can use a diagnostic
device to read out the driver PIN and, if
necessary, restore the factory default driver
PIN.
ACCESS CODE input menu
The driver enters the fiv
e-digit driver PIN
(00000 to 99999) in this
input menu.
The driver PIN is entered using the buttons (1).
The digits entered for the driver PIN (2) are not
visible, instead being represented by circles.
If the driver PIN entered is correct, the familiar
display appears with the standard display, and
all truck functions are available.
55
048011501 EN - 12/2015 87
To Next Page
Loading...
