5 Operation
Handling the battery
5060_003-115
1
2
3
– Push down and close the battery hood (3)
using the handle (2).
– Ensure that the locking lever (1) has en-
gaged.
Final measures for ERS driver restraint
system (variant)
CAUTION
Risk of damage to components!
Do not open a closed restraint system by force.
NOTE
If the parking brake is on and the key switch is
turned off, the restraining brackets swivel into
the opened position once the power supply is
restored.
CAUTION
Risk of component damage!
If you connect the battery male connector with the
key switch switched on (under load), an arc will
be produced. This can lead to corrosion at the
contacts, which considerably shortens their service
life.
– Switch off the ignition switch before the battery
male connector is disconnected.
frs_003-022
5
– Connect the battery male connector.
The restraining brackets (5) automatically
swivel upwards.
Final measures for HRS driver restraint
system (variant)
– Press left restraining bracket (6) inwards.
25
8 55048011501 EN - 12/2015
To Next Page
Loading...
