Operation 5
Cleaning
CAUTION
Excessive water pressure or water and steam that
are too hot can damage truck components.
– Adhere strictly to the following steps.
– Only use high-pressure cleaners with a
maximum output power of 50 bar and at a
maximum temperature of 85°C.
– When using high-pressure cleaners, make
sure there is a distance of at least 20 cm
between the nozzle and the object being
cleaned.
– Do not aim the cleaning jet directly at
adhesive labels or decal information.
DANGER
Risk of fire!
Deposits/accumulations of combusti-
ble materials may ignite in the vicinity
of hot components (e.g. drive units).
– Adhere strictly to the following
steps.
– Regularly remove all deposits/accumula-
tions of foreign materials in the vicinity of
hot components.
DANGER
Flammable fluids can be ignited by
hot components on the truck, causing
ariskoffire!
– Adhere strictly to the following
steps.
– Do not use flammable fluids for cleaning.
– Note the manufacturer’s guidelines for
working with cleaning materials.
CAUTION
Abrasive cleaning materials can damage compo-
nent surfaces!
Using abrasive cleaning materials that are unsuita-
ble for plastics may dissolve plastic parts or make
them brittle. The screen on the display operating
unit may become cloudy.
– Adhere strictly to the following steps.
55
048011501 EN - 12/2015 289
To Next Page
Loading...
