Still RX50-13 - Page 324

6 Maintenance
Providing access to maintenance po
ints
5060_003-132_V2
6
5
Removing the right bottom plate
NOTE
The accelerator pedal is attached to the right
bottom plate and is removed with it. The
connecting plug for the accelerator is located
underneath the bottom plate.
– Lift the bottom plate (5) forwards and
carefully guide it upwards over the brake
pedal (6).
– Disconnect the connecting plug for the
accelerator.
– Remove the bottom plate.
Installing the right bottom plate
– Position the bottom plate.
– Connect the connecting plug for the accel-
erator.
– Lower the bottom plate, carefully guiding it
downwards over the brake pedal.
– Close the bottom plate.
31
2 55048011501 EN - 12/2015